spridgets
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Spridgets] Hex Size

from [David Lieb] [Permanent Link][Original]
To: "S pridgets" <spridgets@autox.team.net>
Subject: Re: [Spridgets] Hex Size
From: "David Lieb" <dbl@chicagolandmgclub.com>
Date: Mon, 9 Mar 2009 18:38:26 -0500 
> I have the same cutout, and an electric winch hanging from the ceiling.

Heck, I have the Horrible Fright engine crane with the air-powered cylinder 
;-)
About to pull the lump again...
David Lieb 

_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Spridgets] measurement needed (Bugeye), Jpp963
Next by Date:  Re: [Spridgets] measurement needed (Bugeye), Jim F.
Previous by Thread:  Re: [Spridgets] Hex Size, Ron Soave
Next by Thread:  Re: [Spridgets] Hex Size, Glen Byrns
Indexes:  [Date] [Thread] [Top] [All Lists]