Frank -
Bonnet was open for battery charging so here goes -
Hat section is 2.5" wide at base (including 3/8" wide flanges where it is
attached), 1.25" at top. Height is 1.0" at bottom edge and 5/8" at top to
match angle of radiator shroud. It is not a constant cross section as it
widens
in the center to 2" where the latch attaches. Hope this helps.
Pete G.
North Haven, CT
**************Need a job? Find employment help in your area.
(http://yellowpages.aol.com/search?query=employment_agencies&ncid=emlcntusyelp00000005)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|