spridgets
[Top] [All Lists]

Re: [Spridgets] Fuel Line or Electrical

To: <spridgets@autox.team.net>
Subject: Re: [Spridgets] Fuel Line or Electrical
From: "Robert Duquette" <robertduquette@sympatico.ca>
Date: Sat, 9 May 2009 14:12:56 -0400
:)

Still awake, are you? :)

-----Original Message-----
From: Bill Masquelier

I soldered a "penny-patch" on a Jeep gas tank once-
Of course I filled the tank with water first to prevent any explosion danger
(left about 1/2" of "air" at the top so I could solder), blew compressed air
thru it for about an hour to purge any remaining gas and proceeded...
The BANG didn't hurt anything but DID wake me up pretty quickly!
After that I went ahead and finished the job and it is still holding 5 years
later.
But I won't do that again

Bill

> From: robertduquette@sympatico.ca
>
> My brother recounted a story to me about a guy who said he was going to
weld
a
> gas tank at a place where he worked.  I think he tried to talk him out of
it,
> but failed.  So, he said, well, I'm not sticking around and he started to
> leave the shop.  Before he could get out the door, he heard the BOOM and
> looked back and saw the guy sitting on the floor with a vacant stare on
his
> face.  :)  Fortunately, only his pride was injured.
>
> > Date: Mon, 27 Apr 2009 22:41:08 -0400
> >
> > But Kevin says he wants to fix this tank, I'm gonna watch him fix it
> > from a distance ;)
> > I saw a gas tank blow up and get airborne by 30 feet once.
> > I'm still just gonna watch when a torch touches a tank.
> >
> > --
> > Frank Clarici
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [Spridgets] Fuel Line or Electrical, Robert Duquette <=