spridgets
[Top] [All Lists]

Re: [Spridgets] front suspension question

To: Clarici Frank <spritenut@comcast.net>, Phil Nase <nases@verizon.net>
Subject: Re: [Spridgets] front suspension question
From: Ron Soave <soavero@yahoo.com>
Date: Wed, 27 May 2009 16:59:48 -0700 (PDT)
You're fine - take it off. 

--- On Wed, 5/27/09, Phil Nase
<nases@verizon.net> wrote:

> From: Phil Nase <nases@verizon.net>
> Subject:
[Spridgets] front suspension question
> To: "Clarici Frank"
<spritenut@comcast.net>
> Cc: "spridgets Spridgets@autox.team. Net"
<spridgets@autox.team.net>
> Date: Wednesday, May 27, 2009, 6:09 PM
> My Mk 1
steering is really
> stiff.  I pulled the wheels and find that the right
>
side swival is too tight.  The left will rotate
> freely.
> 
> So I need to
add shims to the right front.  I have the
> wheels off jack stands under the
chassis and a jack under
> the right A arm.  It doesn't compress the coil
spring
> any without lifting the front end off the jack stands.
> 
> Can I
remove the shock attachment and the upper trunnion
> without the spring
letting go as long as the jack is up
> against the A arm?  Or will the spring
decompress and
> ruin my day?  Do I need to remove the spring and play
> it
safe?
> 
> I'm just not sure what's gonna happen if I unbolt the shock
> arm.
> 
> Ducking for cover
> Phil Nase
> Quakertown, PA
>
http://home.comcast.net/~philnasecpa/
>
_______________________________________________
> Support Team.Net 
http://www.team.net/donate.html
> 
> You are subscribed as soavero@yahoo.com
>
> http://www.team.net/archive
> 
>
http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>