I think you want to fill from the bottom, so you bleeder is on top.
Not sure you could ever get all the air out if the bleeder is on the
bottom. All of my factory calipers fill from the bottom.
On Sat, Jul 18, 2009 at 8:28 PM, Lester<oldsaabguy@comcast.net> wrote:
> Hi all,
>
> I am installing some Wilwood calipers and have a question:
>
> As the calipers are not "handed" and have ports top and bottom on both
> sides, is it better to have the brake fill from the bottom or the top?
>
> As I see it, filling from the bottom means less air trapped in the line
> *BUT* it also means that any water in the system will settle in the metal
> line and rust it away while filling it from the top might trap air but not
> gonna trap any water.
>
> So what say you all?
>
> Lester
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as jdinnis@gmail.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
>
--
=================================
= Never offend people with style when you =
= can offend with substance --- Sam Brown =
=================================
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|