They make flashers (the little tin cylinder with two or three prongs on the
bottom) that play a tune while they are ON. Would this solve the problem?
...bill in oregon
===================================================
-----Original Message-----
From: spridgets-bounces@autox.team.net
[mailto:spridgets-bounces@autox.team.net] On Behalf Of Michael Rowe
Sent: Sunday, August 02, 2009 10:20 AM
To: SPRIDGETS
Subject: [Spridgets] Blinker
My turn signal return does not work, so I put in a tiny Radio Shack buzzer
in parallel across the terminals of the flasher can. This worked fine for a
month or so, with the buzzer sounding when the flasher was open, and quiet
when the flasher was closed (no potential). Then the flasher stopped
opening, and several new flasher cans lasted shorter intervals, one of them
only one day. I have determined that the current/voltage is enough to power
the flasher alone or the buzzer alone, but not both. With the buzzer
attached, the flasher does not heat enough to open, and the buzzer does not
get enough current to make noise.
I really don't understand how a buzzer 1/2" in diameter with really fine
wires can steal enough power to prevent the flasher from heating. I measure
13v at the can. Any thoughts?
Michael Rowe
'74 Midget
'60 Sprite kit
Long Island, NY
_______________________________________________
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|