spridgets
[Top] [All Lists]

Re: [Spridgets] Basic starting procedure for Spridget

To: Peter Caldwell <peter@nosimport.com>, Spridgets@autox.team.net
Subject: Re: [Spridgets] Basic starting procedure for Spridget
From: Edward Perez <eap2140@yahoo.com>
Date: Fri, 19 Mar 2010 14:46:23 -0700 (PDT)
Started the first time!  SWeeeeetT!

 Edward Perez
Snohomish, WA
78 Midget (1275)
http://www.flickr.com/photos/lbc_newbie/




________________________________
From: Peter Caldwell <peter@nosimport.com>
To: Edward Perez <eap2140@yahoo.com>; Spridgets@autox.team.net
Sent: Thu, March 18, 2010 1:27:54 PM
Subject: Re: [Spridgets] Basic starting procedure for Spridget

Ed, pull choke out, then open bonnet and feel if you can pull even more on the 
cable... or push down on the choke linkage. I find that just that extra little 
bit.. maybe 1/8" matters a lot.
        Peter C

At 03:14 PM 3/18/2010, Edward Perez wrote:
> I had my dual SU HS2 carbs rebuilt for my 1275.  The car RUNS great, but 
>starting first thing in the morning is painful.  Am I doing something wrong?  
>I have an electric fuel pump....do I need to wait a certain amount of time 
>before trying to start it in the morning?  This only happens when it's cold.  
>It takes about 8-10 tries to get it started.  Starting afterward is fine.  
>This may sound stupid, but is there a process for this?
> 
> 1. Pull choke out
> 2. Turn key to start fuel pump
> 3. Wait about 30 seconds
> 4. Depress gas pedal a couple of times
> 5. Crank, crank, crank, crank, crank......sputter sputter, start.
> 
>  Edward Perez
> Snohomish, WA
> 78 Midget (1275)
> http://www.flickr.com/photos/lbc_newbie/
> _______________________________________________
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>