spridgets
[Top] [All Lists]

[Spridgets] exhaust system bugeye

To: spridgets@autox.team.net
Subject: [Spridgets] exhaust system bugeye
From: Jess Power <jessmd1@comcast.net>
Date: Fri, 16 Jul 2010 19:29:25 -0500
I am putting an exhaust on my bugeye that has a 1275cc engine.It has a  
flange that seats but there is a gap between the pieces holding the  
pipe in the manifold.The gap is about 1/16 inch and the bolts are very  
tight.Also the fuel line was running right next to the exhaust.I  
separated the two.Is the muffler supposed to be angled upward at the  
back of the car?
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>