Mike... Put a 3 foot length of 2x4 under each front tire. You can now get
the lift under the A-arms and also roll the car forward and back as
needed..... I've used 3 different manufactures of lifts and none have made
under the A-arms...
Cheers!!
Jim
On Sun, Nov 14, 2010 at 1:23 PM, Mike Eldred <redscirocco@hotmail.com>wrote:
> I have one of the Harbor Freight engine cranes, too. I just finished a
> clutch
> job on my Midget using it.
> I ran into the same problem - the frame legs hit the A-arms on my Midget
> when
> I tried to roll the crane udner the car (or more precisely, when I tried to
> roll the car over the frame legs). I solved the problem by taking the
> wheels
> off the hoist. Because of the way it's constructed, I did have to put
> boards
> under the legs to level things up. But it worked just fine.
>
> -Mike Eldred
> Wilmington, VT
>
> Date: Sat, 13 Nov 2010 17:12:59 -0800
> From: Billy Zoom <billyzoom@billyzoom.com>
> Subject: Re: [Spridgets] what does a shortblock weigh?
> To: BJNoSHOV8 <bjshov8@tx.rr.com>
> Cc: "spridgets@autox.team.net" <spridgets@autox.team.net>
> Message-ID:
><C904779B.2BB6E%billyzoom@billyzoom.com<C904779B.2BB6E%25billyzoom@billyzoom.com>
> >
> Content-Type: text/plain; charset="US-ASCII"
>
> > come-along at Harbor Freight for $15.
> I have a nice engine hoist, but the frame won't fit between the wheels of a
> Sprite.
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|