spridgets
[Top] [All Lists]

[Spridgets] axle or pinion problems?

Subject: [Spridgets] axle or pinion problems?
From: aseippel at austin.rr.com (Jim Seippel)
Date: Mon, 15 Aug 2011 23:05:01 -0500
References: <137f.69e15a01.3b797a05@aol.com> <9dm03d$co3hmk@email.mtu.edu><E5731695-C021-4388-95DD-E82308F690EC@chartermi.net><002701cc5ad4$385b35d0$a911a170$@rr.com><67D324B7-F532-4D5D-9B19-8AE0F65D1245@chartermi.net><000301cc5ae0$03f3df70$0bdb9e50$@rr.com> <CA+Xq+0xsx0EYEJd-0q4TUxn4HttD=OWNBmsybd6FuV_OmHUidQ@mail.gmail.com> <5C595FFEEAE94D56A2A3DF19CB064B40@RikerPC>
You don't stick a drift into the pumpkin. You tap on the piece of broken
axle. I use a thin metal rod that goes through the spider gears and then
pushes out the broken piece. If you look through the stock differential, you
will see a shaft that goes through the spider gears. It is directly between
the gears the axles slide into. There is a space that a thin rod can
penetrate. If you get a long enough rod, you can tap out the broken axle
spline without pulling the differential. I found that a metal rod used to
support a floral display fits through the opening perfectly. It is perfect
to tap out the broken part. There is probably a similar rod available at
Lowes, but I haven't looked there. Once the broken spline is out of the
differential, a magnet will pull it out of the axle housing. I use one of
the orange extending magnet you can get at Sears or from one of the Tool
trucks. Amazon has a similar one. http://tinyurl.com/44j3bem 
Jim 

-----Original Message-----
From: spridgets-bounces at autox.team.net
[mailto:spridgets-bounces at autox.team.net] On Behalf Of David Riker
Sent: Monday, August 15, 2011 10:05 PM
To: CosmicMag1380
Cc: Spridgets
Subject: Re: [Spridgets] axle or pinion problems?

Ok, I've been doing this for a long time (bought the Midget in 82) and have 
only had one broken axle.  I do not understand the part where you remove the

opposite side and drift the little piece out.  Aren't the spider gears and 
stuff in the way?  While trying to follow these instructions I destroyed a 
center pumpkin.  You definitely DON'T want to stick a long drift in from the

opposite side and bang on it with a hammer.  I have to be missing something 
here.
David

<Prev in Thread] Current Thread [Next in Thread>