spridgets
[Top] [All Lists]

[Spridgets] Bugeye Suspension Help Sought

Subject: [Spridgets] Bugeye Suspension Help Sought
From: kevinv1275 at gmail.com (Kevin Valentine)
Date: Sun, 1 Jan 2012 22:07:48 -0500
References: <9b47.7d5184a0.3c32770b@aol.com>
Howard,

Are you talking about the inner fulcrum pins?  At the inboard end of  
each A-arm?

If so, I have had to cut them off with a reciprocating saw on several  
occasions.  Heating them usually only melts the bushings and they are  
still stuck to the metal portion of the bushings which will not pass  
thru the holes in the A-arm.  Spraying them with liberal amounts of  
PB Blaster or Liquid wrench sometimes helps......

Kevin



Kevin


On Jan 1, 2012, at 9:57 PM, Miniac7 at aol.com wrote:

> In dismantling my Bugeye front end today I was able to remove both  
> of  the
> A-arm fulcrum pins from the right side, although it took  
> significant  blows
> with a BFH to do so. The left side however is a different animal.  
> What's
> the suggested method of removing these pins when they don't want to  
> budge?
> They  turn freely but I cannot drive them out. HELP !!!

<Prev in Thread] Current Thread [Next in Thread>