I have about 10 smooth case trannys and plates , joe
Sent from my iPhone
> On Oct 3, 2014, at 4:08 PM, Kirk Hargreaves <khargreaves2@gmail.com> wrote:
>
> Thanks to all who are helping me help my sisiter with her 984 and broken
> smooth case.
>
>> On Fri, Oct 3, 2014 at 12:04 PM, Mark Haynes <haynes386@netzero.net>
wrote:
>>
>> Kirk-She'll need a 1275 rear engine plate, the 948 flywheel should be
>> redrilled for a 1275 clutch cover, and possibly a pilot bearing. Gerard
has
>> it spelled out in his website's tech section (
>> http://gerardsgarage.com/Garage/Tech/TO_Bearings/tobearings.htm).
>> I did this with my MKII and used the 948 slave cylinder and a roller TO
>> bearing that I got from Winner's Circle (NLA) along with a custom aluminum
>> flywheel cut to stage 1 948 dimensions and drilled to 1275 pattern. It all
>> works well together.
>> Is there something wrong with your sister's trans? you didn't state that,
>> just if it was possible.
>>
>> Mark Haynes
>> It only goes one way-Pay it Forward
>>
>>
>> From: Kirk Hargreaves <khargreaves2@gmail.com
<http://webmailb.netzero.net/webmail/new/8?folder=Inbox&msgNum=00002Tk0:001KB
iPN00001knd&block=1&msgNature=all&msgStatus=all&count=1412362006&randid=97020
8314&content=central>>
>> To: Spridgets <spridgets@autox.team.net
<http://webmailb.netzero.net/webmail/new/8?folder=Inbox&msgNum=00002Tk0:001KB
iPN00001knd&block=1&msgNature=all&msgStatus=all&count=1412362006&randid=97020
8314&content=central>>
>> Subject: [Spridgets] Parts Needed
>>
>>
>> I am trying to help my sister who lives on a ranch outside of Chico Ca. A
>> few years ago she fell in love with a Bugeye, stock in nice condition very
>> original with the 948 and smooth case.
>>
>> A mechanic she used and trusted in her area, a guy who loved to work on
our
>> cars has passed away. So she is now a bit concerned about finding an
>> honest mechanic.
>>
>> I told her that most mechanics are not oriented to our cars, but with the
>> right parts, and the simple nature of working on a Sprite, a good mechanic
>> would be able to take care of it for her.
>>
>> So I am trying to find a rib case for her and an original throwout
bearing.
>>
>> I am running an original TB and it is holding up fine . . but the one I
>> bought via Moss a few years ago broke apart like hard cheese after about
>> 500 miles. I am going to check eBay before I send her my last original TB
>> that I have been keeping.
>>
>> So two questions:
>>
>> Does anyone have a source on a solid rib case and also, there is an
adaptor
>> plate she will need to attach the rib case to a 948?
>>
>> Thank you so much!
>>
>> Kirk
>>
>>
>>
>> ____________________________________________________________
>> *The #1 Worst Carb Ever?*
>> Click to Learn #1 Carb that Kills Your Blood Sugar (Don't Eat This!)
>> <http://thirdpartyoffers.netzero.net/TGL3232/542ef383d2fb973833e67st02duc>
>> FixYourBloodSugar.com
>> <http://thirdpartyoffers.netzero.net/TGL3232/542ef383d2fb973833e67st02duc>
> ------------------------
>
> spridgets@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/jssprite58@cox.net
------------------------
spridgets@autox.team.net
Archive: http://www.team.net/archive
|