spridgets
[Top] [All Lists]

Re: [Spridgets] Thick head gasket

To: "lotuspilot@frontier.com" <lotuspilot@frontier.com>
Subject: Re: [Spridgets] Thick head gasket
From: Ron Soave <soavero@yahoo.com>
Date: Wed, 17 Dec 2014 07:53:16 -0600
Cc: Spridgets List <spridgets@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: spridgets@autox.team.net
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s2048; d=yahoo.com; b=NVKlWvKp7gzwsidqaTaJDkB1erCH1oFTTTZqVy+DipNCLCSgolkymbofqpkqujDWKAdIo+NopxqW5leh5fTyXnZXUz49RZGiMKE27gNXRdVZxWPQg7d3Cu9fBdDAI8G3AnXniHoZtf82bNAVOLgZ1Sz47dimKmsdltIgzmv/XvW9Nb2JLQs/djFrkc8YqytiWKgmcOpxqZdCZAZ3MAcJn+I/RwNivihOVtGw+8Ella4ZaWxP8Y0X6o+kvc7/WjFc6806NZQiBSZSItQ+pH49GYXxhpr7E9VZ3grxfWwNvSoXyFQoxtSZII/wuk7oqpPriK08MKeMGAiu1QcmNyJT8Q==;
References: <1418822063.90351.YahooMailBasic@web164901.mail.bf1.yahoo.com>
Try www.headgasket.com. Morty is a Triumph racer and has made them as thick as
.090 for me for around $100. Beats a holed piston's cost.

Ron Soave

> On Dec 17, 2014, at 7:14 AM, "lotuspilot@frontier.com"
<lotuspilot@frontier.com> wrote:
>
> I had forgotten there name.  Thanks.
>
> I wonder what thickness that you all would try if you knew the engine was
> roughly 11.5 - 12 on compression.  This will be a trail and error thing and
I
> am trying not to error too much.
>
> Also.  If an engine was running in 1980 prior to being torn down to replace
> bearings and inspect, would those same rings work fine on those same
cylinder
> walls that they were run in the past?  The reason, I am asking is we lost
our
> last engine machine shop around here and I would like to avoid searching
for
> one at the moment.  I am in the mood of just making the engine spotless
inside
> and out and buttoning it all back up.
>
> Again thanks and any comments help.
>
> Mike
> --------------------------------------------
> On Wed, 12/17/14, Trevor Jessie <trevor.jessie@gmail.com> wrote:
>
> Subject: Re: [Spridgets] Thick head gasket
> To: "lotuspilot@frontier.com" <lotuspilot@frontier.com>, "Spridgets List"
> <spridgets@autox.team.net>
> Date: Wednesday, December 17, 2014, 7:08 AM
>
> Cometic.com  $$$$$$
>
> On Wed, Dec 17, 2014,
> 7:06 AM lotuspilot@frontier.com
> <lotuspilot@frontier.com>
> wrote:
> Hi
> Guys and Gals,
>
>
>
> I have a Huffaker 995cc race engine with 3/4 race cam that I
> would like to lower the compression on.  I have no desire
> to run race fuel.  I would like to run premium pump fuel.
> It is a really beautiful engine with all of its original
> black crinkle finish in tact.  It was the engine from one
> of Frank Ince's old Bugeyes (The silver 1958).  Do they
> make thicker than stock head gaskets for BMC A-series
> engines?
>
>
>
> Thanks for any knowledge that you all have on this.
>
>
>
> Mike Carpenter
>
> ------------------------
> ------------------------
>
> spridgets@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/soavero@yahoo.com
------------------------

spridgets@autox.team.net


Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>