Thanks Hal,
Mine is a first edition, Pg 286 is forced induction section. Still looking
for it in the cam section, but the firt edition may preceed this cam(??)
Thanks for the info.
Gerard
At 5:36 PM -0800 12/17/01, Hal Faulkner wrote:
>Gerard,
>
>In my copy of Vizard's book(2nd edition) there is a list of VP cams on p286.
>The VP7 is listed as follows:
>
>Timing 32-56-64-32
>
>Duration 268-276
>LCA 106
>
>lift 1.25 R/R 0.375/0.375
>
>lift 1.5R/R 0.440/0.440
>
>Application: High performance street cam for use with 1.25 rockers. Lopey
>idle in smaller engines, but pulls strong from 2500 or so to 7000rpm. Has
>smoother idle in 1100s and 1275s. Excellent mid and top range compared to
>standard equipment factory cams (including MG Metro)
>
>Hal
>
>
>> -----Original Message-----
>> From: owner-spridgets@autox.team.net
>> [mailto:owner-spridgets@autox.team.net]On Behalf Of Gerard
>> Sent: Monday, December 17, 2001 5:17 PM
>> To: Ron Soave; spridgets@autox.team.net; team-thicko@autox.team.net
>> Subject: Re: Cam ID
>>
>>
>> Ron,
>>
>> There is indeed a VP7 on the APTFAST web site. Listed as a
>>
>> 'A' Series Mild Performance Street Cam - Pin Drive Nitrided.
>>
>> Part number is appended as SN rather than SB, but I suspect it is the same
>> grind. No specifics however. I'm going to email them and see what I can
>> find out.
>>
>> Thanks!
>>
--
Please visit Four Points Travel -
Discount Online International Travel Reservations
http://www.gerardsgarage.com/fourpoints
To make a reservation please call Toll Free 1-800-272-3253
G G Gerard Chateauvieux
E A
R R pixelsmith@gerardsgarage.com
A A
R G Pixelsmith on Duty
D E
S http://www.gerardsgarage.com
///
/// team-thicko@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
///
|