tigers
[Top] [All Lists]

RE: radiators and water chemistry

To: TBallou@lanmail.rmc.com, "'Roland Dudley'" <cobra@cdc.hp.com>
Subject: RE: radiators and water chemistry
From: "Richard Atherton (Entex)" <a-richat@MICROSOFT.com>
Date: Wed, 28 May 1997 02:50:35 -0700
        This is common in saltwater based boats.  A ZINK block is
attached on or near the outdrive as the sacrificial Lamb of metal.

Rich


> ----------
> From:         Roland Dudley[SMTP:cobra@cdc.hp.com]
> Reply To:     Roland Dudley
> Sent:         Tuesday, May 27, 1997 2:13 PM
> To:   TBallou@lanmail.rmc.com
> Cc:   tigers@autox.team.net
> Subject:      Re: radiators and water chemistry
> 
> > Copper and aluminum are both excellent heat transfer materials.
> However they 
> > don't mix well.  In fact, they are bitter enemies!  When they are
> put 
> > together the result is rapid and destructive corrosion.  Even when
> linked 
> 
> > tiles on the scape shuttle), but doesn't transfer heat well at all.
> If you 
> > are going to switch some components, you need to think about
> switching 
> > everything - radiator and heater core (and thermostat).  Otherwise
> you will 
> > have constructed a battery and the aluminum component will be
> sacrificial 
> > anode.  Could be your intake, radiator, those expensive aluminum
> heads.   
> 
> Quite true.  I've notice the same thing in my aluminum water pump body
> and intake manifold.  Here's a counter measures that was suggested to
> me:  Install a chunk of magnesium in the radiator or header tank as a
> sacrificial anode, perhaps suspended by a stainless wire or chain so
> that it can be easily checked and replaced.  Anyone ever tried this?
> 
> Roland
> 

<Prev in Thread] Current Thread [Next in Thread>