James Barrett wrote:
>
> At 11:10 AM 5/25/99 +0200, you wrote:
> > What's
> >the matter?...
> Moreover the mixture obviously was rich, very
> >rich to say the least.
> >Roland
> >B 9471941
> >in Switzerland
> >e-mail: roland.flueeler@cantrade.ch
>
> Could be that you used the wrong gasket for the
> powervalve, or the new powervalve is leaking. If this is
> a Holly could be that the gasket between the throttle body and the
> base is leaking or installed incorrectly.
> If the main jets are loose then fuel can leak around the jets.
> If the fuel pump is putting out more than 9 psi or so then
> you will overcome the needle and seat and flood the carb.
>
> James Barrett Tiger II 351C and others
Hi There!
I'm a new Tiger listerserv participant. I also happen to have a Holley
Tuning page that many people find helpful. I hope you all like it!
http://home.inreach.com/geewhiz/carb.htm
Gerard
65 Mk I
--
BOB Oil Recovery System: http://www.bob2000.com
-----------------------------------------------------------
Geewhiz Homepage: http://home.inreach.com/geewhiz/4277.htm :
Fast Ford cars, ATV's, Rockets, & A Tribute to My Late Father
|