tigers
[Top] [All Lists]

Re: T5 for sale?

To: derekw@zamnet.zm, tigers@autox.team.net
Subject: Re: T5 for sale?
From: FrizBMG@aol.com
Date: Tue, 30 Nov 1999 07:01:24 EST
In a message dated 11/30/99 3:55:26 AM, derekw@zamnet.zm writes:

>I need to make a gearbox decision shortly. Does anyone have a T5 gearbox
>for
>sale or know of where I could find one and how much? I'll also need the
>6-bolt bell housing, all the clutch bits and a propshaft.
>
>I've bought a 302 and was wondering what other bits I'll need to fit this
>(somebody mentioned the front pulley?) If the T5 makes the car more
>drivable, I'll cut the tunnel and move the crossmember now while I'm
>replacing the rotten metal. If anyone has a drawing of the T5 they could
>fax
>me, I could use it to do the mods before the box has sailed east.
>
Hi Derek 
 I am in the middle of acquiring the last piece to do this myself.I have a 
professionally local built 302 stroker shortblock to finish and install.
You need to keep in mind which year crank you have so you can match up thier 
respective pieces.69-82(?) 302 cranks use a 28.8 oz imbalance setup and 82-96 
cranks use a 50oz imbalance ,you cannot mix and match the piece between the 
two without really bad vibratation.
 What you need are three different pieces,and a modified clutch bracket to 
fit the new bolt pattern.
You need
1)the block plate  that fits between the block and scattershield -keeps 
debris out of the flywheel/clutch area(this is the piece that I am now 
lacking)
2) the scattershield /clutch cover/bellhousing piece that the trans bolts 
onto and joins the trans to the engine.May require the trans to be re-cased 
or holes drilled in the bell if you have the smaller bolt pattern"ears" on 
your transmission(odds are you do).
3)The clutch fork that holds the throw -out bearing.The 6-bolt setup is just 
enough larger that the old one is unusable.
 I have more info on this on a zipdisk somwhere.I will send it later if you 
like(I saved a bunch of posts relating solutions to this that have worked for 
other list members
Tony 

<Prev in Thread] Current Thread [Next in Thread>