Mike, what size steering wheel, tire size, and wheel diameter do you
have? If I remember, you are using 195-50/15 on Panasports in the front.
As I understand, you use shims under the rear portion of the alum spacer
on the crossmember to frame rails for the caster adjustment. If so, did
you use alum shims, and what thickness for this adjustment?
I have the Dale A kit for the Ackerman angle reduction problem, and I
use the MG Midget R&P which has a 2.7 vs 3.7, turn to turn, and
therefore a lot more heft to turn the wheel.
Thanks.
Larry
|