tigers
[Top] [All Lists]

Re: Floor jack saddle

To: stephen jones <joness@wsu.edu>
Subject: Re: Floor jack saddle
From: Steve Laifman <SLaifman@SoCal.RR.com>
Date: Wed, 17 Oct 2001 09:06:59 -0700
Just jacked up Tiger front end using Floor jack with rotating pad
removed and short piece of wood 2x4 on the remaining flat pad. Worked
well, with no slippage.

Cheap too (not the jack, however, which was a Sears special buy
including 2 lever/notched casting supports for $99. Well made, high
lift, not especially low pad height.)

Steve
--
Steve Laifman        < Find out what is most    >
B9472289              < important in your life     >
                               < and don't let it get away!>
<SLaifman@SoCal.RR.com>
<http://www.TigersUnited.com/gallery/SteveLaifman.asp>

_/_/_/_/_/_/_/
     _/                 _/_/_/       _/_/_/       _/
    _/        _/      _/     _/     _/    _/     _/_/_/_/
   _/        _/       _/    _/      _/  _/      _/
  _/_/_/_/_/__/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
                          _/
                     _/_/_/

<Prev in Thread] Current Thread [Next in Thread>