The thickness of the coating is about .003" - .005". Not much from a
reduction in flow area, but if you have some slip fits, and they are
snug, then they won't fit after coating, and you will have to grind away
the coating on the slip fit area, or may the fit loose before coating.
Craig Wright
SFordRB@aol.com wrote:
>
> The coating is applied inside and out and is of nominal thickness. For all
> intensive purposes the thickness is not increased.
>
> Contact me of the list for more specific info and the address of our web
> site. In addition several people have used Cermakrome on Tiger headers and
> have been very pleased.
>
> Moonstone
|