Re: Stock: 4bbl Cast Iron Manifold?

[John Clark <clarkjc@stny.rr.com>]

The "J", as in D1JE, is also used for marine applications (boats).

- John

At 03:49 PM 06/30/2002 -0700, you wrote:
>Tom, The number DI JE-8425-AA might be mis-read, should be D1JE-9425-AA.
>"D" would be the 1970's, "1" would be 1971, "J" is for an Industrial
>engine. So this manifold would be first made for a 1971 industrial
>application, stationary engine, fork lift, truck, etc. If it is marked
>"8425" this would be unusual as intake manifolds are numbered "9424" or
>"9425".