Bob
Someone last week I think stated that the May issue of Hot Rod has
an article about mating a T-5 to any engine, adaptors and parts made by
McLeod Industries. The article shows a series of spacers, looks like 1/4"
to over 1". The article has a table that describes what parts are needed
by engine and type of transmission plus the year of the transmission is
important. I have not checked the web site but hopefully all that
information is there.
www.mcleodind.com
I have no experience with these parts or the parts you mentioned.
Hopefully the McLeod web site can help you or you can find a copy of the May
issue of Hot Rod.
Ron Fraser
-----Original Message-----
From: owner-tigers@autox.team.net [mailto:owner-tigers@autox.team.net] On
Behalf Of CE25593@aol.com
Sent: Wednesday, May 07, 2003 9:57 PM
To: tigers@autox.team.net
Subject: Bellhousing adapter plate
The National Parts Depot Mustang Catalog has an adapter plate for mating a
T-5 to a 5-bolt bellhousing. It apparently adds about about 1/, more or
less, to the total length from the bellhousing to the tailshaft. Has anyone
had any experience with this adapter in their Tiger?
Bob Haynes, San Diego
B382000793
---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.476 / Virus Database: 273 - Release Date: 4/24/2003
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.476 / Virus Database: 273 - Release Date: 4/24/2003
|