tigers
[Top] [All Lists]

RE: Fuel lines and Fuel pump

To: "'rfraser@bluefrog.biz'" <rfraser@bluefrog.biz>,
Subject: RE: Fuel lines and Fuel pump
From: "Ronak, TP (Timothy)" <Timothy.Ronak@AkzoNobel.com>
Date: Fri, 23 May 2003 15:06:44 -0400
Listers,
The fitting coming out of the fuel transfer tube is half inch. Does anyone
know the internal diameter and whether there is a fitting that threads on to
this that might permit me to mate up a three eights fuel line to. If
possible a Half inch line would be even better but I am not sure if the
fitting will support that. Anyone done this before?

Best Regards,

Tim Ronak
Business Development Manager
Akzo Nobel Coatings
Off: (949) 305-5393
Fx: (425) 955-6268
Cell: (949) 289-3357
email: timothy.ronak@akzonobel.com
VM: (800) 234-6747 ext. 2257# 

This message, including attachments, is confidential and may be privileged.
If you are not an intended recipient, please notify the sender then delete
and destroy the original message and all copies. You should not copy,
forward and/or disclose this message, in whole or in part, without
permission of the sender.

<Prev in Thread] Current Thread [Next in Thread>