tigers
[Top] [All Lists]

Lakewood answers

To: "Tiger List \(Tiger List\)" <tigers@autox.team.net>
Subject: Lakewood answers
From: "Frank Marrone" <itswonderful@comcast.net>
Date: Mon, 30 Aug 2004 16:37:13 -0700
I can answer definitively with respect to Lakewood scattershield fit in a
Tiger transmission tunnel.  At least for B9471116.  No need to cut the
safety flange around engine to housing mounting area.  Moderate application
of large hammer required between 9 O'clock and 10:30 O'clock on the
Passenger side and also between 2 O'clock and 3'Oclock on the drivers side
(referenced facing the tunnel from the engine compartment).  The
modifications were required just in front of where the firewall part of the
sheet metal makes the first bend into the tunnel part of the sheet metal.
Not pretty but it only hurts to look at it when the engine is out of the
car.  

Frank





<Prev in Thread] Current Thread [Next in Thread>