tigers
[Top] [All Lists]

UnStuck My Distributor

To: <tigers@Autox.Team.Net>
Subject: UnStuck My Distributor
From: "Steve" <tiger.tail7@verizon.net>
Date: Sun, 9 Jan 2005 18:19:44 -0800
Hi, I wanted to give props to everyone that gave me suggestions for getting my
dist out, I took a plastic mallet and hit down ward and then put a crow bar
and lift up, went up a inch, turned and pulled up and finally came out, pretty
stuck.
                                                                  Thanks

                                                                   Steve
----- Original Message -----
From: Steve
To: tigers@autox.team.net
Sent: Tuesday, January 04, 2005 8:54 PM
Subject: Stuck Distributor Question


Hi Listers,
I am improving a cops Tiger, "long list of what I am doing" one thing I wanted
some help with, I am going to install a FIB manifold and I can not lift out
his Accel distributor I unbolt the set bracket to distributor, I can turn it
but it wont pull up, it make a knock sound like it is catching at the top part
of shaft, squirt some lubricant down the shaft too. puzzled.

                                                               Steve Coleman
                                                                 B382000400





<Prev in Thread] Current Thread [Next in Thread>
  • UnStuck My Distributor, Steve <=