Mark:
If you can find it, fish oil is a really great lubricant -- it's light and
will not clog up the works. I used to use it years ago on rotating
microwave assembly bearings that had to be drag-free for proper high speed
operation (back in the mechanical days c.a. 1965).
Tony
----- Original Message -----
From: "Jeffers" <jeffers@mwt.net>
To: <Tigers@autox.team.net>
Sent: Wednesday, November 28, 2007 8:12 PM
Subject: Re: [Tigers] tiger clock
> Mark
> I cleaned and adjusted mine myself. The hardest part was getting the
> movement out of the case. Spray the movement with carb cleaner and let
> it dry. Using a toothpick or a needle put one drop of oil , like 3 in
> 1, on the shafts of only what moves. Too much oil will collect dust
> and cause it to stop working over time.
> Tom
> _______________________________________________
> bamcnulty@optonline.net
>
> Tigers@autox.team.net
> http://autox.team.net/mailman/listinfo/tigers
_______________________________________________
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
|