tigers
[Top] [All Lists]

Re: [Tigers] Brake line routing

To: "Tim Webster" <crabco@shaw.ca>
Subject: Re: [Tigers] Brake line routing
From: "Bob Josten" <bob@rjosten.com>
Date: Fri, 21 Nov 2008 08:51:25 -0800
Hi Tim, I used the Classic Tube stainless lines on my mk2 and with one small
exception they fit and look great. I recall they were about $200 so it
seemed very reasonable.
Bob

On Thu, Nov 20, 2008 at 2:09 PM, Tim Webster <crabco@shaw.ca> wrote:

> Hi,
>
> I am having some problems figuring out how to correctly route my Mark 1
> brake
> hydraulic lines. Is there a resoruce somewhere that offers a schematic and
> description of the correct routing and mounting of these lines? I will be
> needing the same information for the fuel line. It would be handy to know
> the
> correct pipe lengths for each piece so I could have them made up
_______________________________________________
Support Team.Net  http://www.team.net/donate.html

Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>