tigers
[Top] [All Lists]

Re: [Tigers] Gauge accuracy issues

To: Steve Sage <fastsage@cox.net>
Subject: Re: [Tigers] Gauge accuracy issues
From: garywinblad@comcast.net
Date: Wed, 24 Dec 2008 15:11:52 +0000 (UTC)
Hi Steve,
Yes, you can just reposition the needle.

Disassemble it.
Move the needle up to 68.  While holding it there from the backside, move the 
needle up to 75.
Reassemble and reinstall.

BUT, be very careful.. if it won't move, don't bend it for instance.  The 
needle is just force fit
to the shaft, if it won't  move as above, you may need to remove it first by 
pulling it straight
out.  But to do that, be even MORE careful.

Gary

----- Original Message -----

From: Steve Sage 

Cc: Tigers@autox.team.net

Sent: Mon, 22 Dec 2008 22:42:10 +0000 (UTC)

Subject: Re: [Tigers] Gauge accuracy issues



My speedo works fine mechanically but only shows about 68 or so when I'm 

really going 75. I've verified the reading differential with two modern 

cars and comparing speed readings by cell phone.



One of the comments (in either the Tigers United article or an email) 

suggested just re-positioning the speedo needle. How does that work? Do 

you just gently pull the needle off its spindle and reposition it a bit?



I've paid to have the speedo re-calibrated a couple of times but it's 

still nowhere near accurate.



Thanks!

Steve Sage

1966 MK1A
_______________________________________________
Support Team.Net  http://www.team.net/donate.html

Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>