Frank,
I made some HH blocking plates-
http://e28-535i.com/upload/HHP1
http://e28-535i.com/upload/HHP2
http://e28-535i.com/upload/HHP3
I used thin aluminum from home depot, weather strip and black paint. The
hole is not necessary. I was going to rivet a bracket to hold the piece in
but friction holds it in place and it is on the forward side of the bulkhead
and also has the air pressure to hold them.
I have the cardboard template somewhere. I would be happy to send it to
you.
Duke
B382002037
-----Original Message-----
From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
On Behalf Of sjhcobra1@cs.com
Sent: Friday, February 27, 2009 22:35
To: amberlychamberlain@sbcglobal.net; tigers@autox.team.net
Subject: Re: [Tigers] tiger air dam and block off plates
Frank:
Mike Scharf makes a vey nice set.? He can be reached at Triumphkid@msn.com.
Steve Halbrook
-----Original Message-----
From: Amberly Chamberlain <amberlychamberlain@sbcglobal.net>
To: tigers@autox.team.net
Sent: Wed, 25 Feb 2009 4:21 pm
Subject: [Tigers] tiger air dam and block off plates
Can someone let me know who to contact for a set of the aluminum air dam and
horn block off plates? If someone has drawing or instructions to make it
that
would be great too. If someone else is looking for one let me know and I
will
get several made.
cheers
frank
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
________________________________________________________________________
Email message sent from CompuServe - visit us today at http://www.cs.com
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|