I was knocked off the mailing list. I'm curious to know if this shows up.
Mark L
My clutch pedal sets about 1" lower than my brake pedal. The clutch
engagement/disengagement takes place too close to the floor for my liking.
I'm
thinking that if the pedal sat at a higher point the disengagement would
also be at a higher point.
My pedal has only one pedal to rod attaching hole (slightly slotted). I
know some cars have two holes in the pedal and the manual shows 2 holes. So,
changing holes is not an option. I have a spacer about 1/2" thick between
the MC and the firewall. Does everyone have the same thickness spacer?
If I remove the spacer or substitute with a thinner spacer this seemingly
would move the pedal to a higher position. Would it move the engagement
position of the pedal to a higher position?
Or are there long and short push rods in the MC which would accomplish the
same thing?
I hope my explanation/questions is clear.
Mark
____________________________________
_Dell Deals: Treat yourself to a sweet deal on popular laptops!_
(http://pr.atwola.com/promoclk/100126575x1223100673x1201716527/aol?redir=http://altfa
rm.mediaplex.com/ad/ck/12309-81939-1629-7)
**************An Excellent Credit Score is 750. See Yours in Just 2 Easy
Steps!
(http://pr.atwola.com/promoclk/100126575x1221823322x1201398723/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072&hmpgID=62&bcd=Jul
yExcfooterNO62)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|