I second this post by Thomas recommending Bill Heeley.
He also rebuilds the linkage for a very reasonable price and when you get it
back it looks like new.
regards
Bob J.
On Sun, Sep 19, 2010 at 8:59 PM, Thomas Prager <tcprager@hotmail.com> wrote:
> Dear Denis,
>
> Silver soldering the cable can be very difficult and six years ago Bill
> Heeley solved the problem with fast turnaround. Here is information from an
> old thread:
> "The easiest way to change out the Shifter bar correctly, if you have
> never
> done it before, is to send your old shifter (all of it) to Bill Heeley
> in
> Olney, Maryland. He will R&R your entire shifter, put in a new "t" bar
> and
> send it back. His number is 301-774-6710"
>
>
>
> tom
> _______________________________________________
> Tigers@autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/tigers/bob@rjosten.com
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|