about 5 is enough. a flat plate with threaded rod coming out the
middle. you can file the sides of thre plate so it become just wide
enough to slide into the stainless strip. then put bolts and washers
underneath.
On Saturday, October 9, 2010, Graham Harlowe <gharlowe@comcast.net> wrote:
> All -
>
> I'll be installing the lower grill finisher soon. (This is the stainless
> trim that fastens to the top of front valance.) My front valance has been
> replaced and I don't recall how many fasteners were used to attach this
> piece, nor their locations. Can anyone provide an estimate for how many
> fasteners were used and approximately where along the piece they were
> located (i.e. where to drill the holes in the valance)? Also, any
> recommendations what to use as fasteners to attach/retain this piece?
>
> Thanks much, as always...
>
> Cheers,
> Graham Harlowe
> B382001466
> _______________________________________________
> Tigers@autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/owain.lloyd@gmail.com
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|