My tool of choice is a popsicle stick. I use that for all the weather
striping where needed. And wood is generally softer than the paint and
certainly duller than a screwdriver...
mayf
On 1/2/2011 8:21 AM, Gary wrote:
> Tony,
>
> I use a small flat tip screwdriver to install the rubber seal, instead of
> trying to slide it. I put one edge of the rubber in the track and then pop in
> the opposite edge and work my way along the track. There should also be holes
> for a screw near each end of the seal to keep it from coming out, once it is
> installed. I then trim it to length.
>
> Gary
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|