I may be interested in your transmission. I am curious about the Mazda MR02
because looks like the shifter position is different. I haven't found any
dimensional information yet, just wondering if anyone has stuffed one of
these in their Tiger.
On Wed, Feb 23, 2011 at 5:30 PM, mike schreiner <mikeflbmer@yahoo.com>wrote:
> I didnt use that one, but I did take a Mustang 5.0 five speed and
> swapped tail housings and shifter plate off a chevy S10 to bring the shifter
> forward and out of the x frame...It is in the car and he shifter is slitly
> forward and center of the orifg hole (could be tilted with an adapter
> spacer to bell housing to bring it out orig shifter hole....I even have a
> fake T handle orig looking shifter arm...I also made a second tranny like
> this to put on shelf as a spare....I would sell it if interested (seeing as
> i am laid off) Ialso have a posi rar end with low gera and left and right
> anti sway bars from a rotary maxda track car...It will bolt right ina
> sunbeam...leaf springs and all...
> Mike in Florida
> --- On *Wed, 2/23/11, Al Fudge <allfudge1635@gmail.com>* wrote:
>
>
> From: Al Fudge <allfudge1635@gmail.com>
> Subject: [Tigers] Ford / Mazda 5speed transmission
> To: tigers@autox.team.net
> Date: Wednesday, February 23, 2011, 7:36 PM
>
> All,
> I'm thinking ahead a bit, but has anyone ever used the 5 speed MR02
> transmission Mazda made for the Ford 88 to 96 small block in a Tiger? 1st
> gear is a bit low at 3.75, but that might be OK with the stock rear end,
> 5th is .75
>
> Al
> B9471635
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/tigers/mikeflbmer@yahoo.com
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|