Duke:
When's the garage-warming party? As soon as you get here, dude! You know
the way!!!
Andy
----- Original Message -----
From: "Samouce's" <wsamouce@kc.rr.com>
To: "'awtiger'" <awtiger@cox.net>; "'Bill Waite'"
<fordlandia@sbcglobal.net>; <tigers@autox.team.net>
Sent: Wednesday, March 23, 2011 12:28 PM
Subject: RE: [Tigers] garage floor coatings
> Great news Andy,
>
> When are you having a garage warming party?
>
> Duke
>
> -----Original Message-----
> From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
> On Behalf Of awtiger
> Sent: Wednesday, March 23, 2011 6:42 PM
> To: Bill Waite; tigers@autox.team.net
> Subject: Re: [Tigers] garage floor coatings
>
> Hey, guys:
>
> I've got to chime in here as well. I've just finished my 1,200 sq ft shop
> and, like my older smaller one, I have it fixed up like a museum. I
> collect
>
> old automotive-related signs and stuff like that, so I wanted a really
> nice
> place in which to hang them, plus store and work on my cars. It's gas
> heated, just like my old one and I'll probably put a dehumidifier in there
> as well, just like my old one. I've had no moisture issues with that set
> up
>
> in my old shop, and Oklahoma is well known for it's summer humidity.
>
> Now, as far as the floor is concerned, this time around I used U-Coat-It
> on
> the floor, which is a two-part epoxy system. I made sure to prep the
> floor
> (new slab) per U-Coat-It's instructions, even speaking to them on the
> phone
> a couple of times during the project. I have no problems with the epoxy
> paint; it appears to be fine. However, this time, I wanted to get a gloss
> coat on the floor, and to that end I used their clear coat product. Once
> again, it was put down to the letter of their instructions and the results
> look fantastic. It also repels oil and other chemicals very handily.
>
> However...and this is a big however...I found out very quickly that the
> clear coat scratches at the slightest provocation. My engine hoist with
> it's metal wheels promptly left it's mark, as did my engine stand, neither
> one with any weight on them. Then, a friend of mine tracked in a piece of
> gravel in his shoe treads and scratched it again. Needless to say, if you
> plan to do any serious work in your shop, stay the heck away from the
> clear
> coat. I plan to do some restoration work in the work bay of my shop and
> I'm
>
> either going to have to refinish the floor after every project or put down
> Race Deck or an equivalent product to protect the floor (at a much greater
> expense, I might add...).
>
> Hope this helps you,
> Andy Walker
> Edmond, OK
> B382001600LRXFE
> TAC #740
> _______________________________________________
> Tigers@autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/tigers/wsamouce@kc.rr.com
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|