Hi Duke,
To get the correct 10 lb preload on the throwout bearing when the clutch
is engaged, divide 10lb by the throwout arm ratio and select a spring that
will provide that force when the clutch is engaged and also stretch to the
full length without taking a set when the clutch is fully disengaged.
John Logan
In a message dated 3/25/2011 2:00:35 P.M. Eastern Daylight Time,
wsamouce@kc.rr.com writes:
I may use a spring anyway though.
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|