tigers
[Top] [All Lists]

Re: [Tigers] Auto Meter tach

To: "Rollright@aol.com" <Rollright@aol.com>, "tigers@Autox.Team.Net"
Subject: Re: [Tigers] Auto Meter tach
From: "Smit, Theo" <Theo.Smit@dynastream.com>
Date: Mon, 30 May 2011 16:36:26 -0500
If it's proper Autometer internal guts then you connect the green tach wire to
the coil negative terminal (the one that connects to the breaker points,
Pertronix black, etc.)
If you're using an MSD then connect the green wire to the MSD's tach output
terminal.

Cheers,
Theo

> -----Original Message-----
> From: tigers-bounces@autox.team.net [mailto:tigers-
> bounces@autox.team.net] On Behalf Of Rollright@aol.com
> Sent: May 30, 2011 12:28 PM
> To: tigers@Autox.Team.Net
> Subject: [Tigers] Auto Meter tach
>
> Hello,
>
> Well, the tach project is finished. Now I'd  like to test it on the
> car
> before installation.
>
> The easy part is 12 Volts and Gnd.
>
> What can I hook the third "signal" terminal to?
>
> And finally, when I pull out the old tach, how do I hook up the new
> one.
> Yes, I know 12V and Gnd. I'm concerned and confused about the third
> terminal.
>
> Can anyone help?
>
> Jim  Armstrong
> _______________________________________________
>
> tigers@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/theo.smit@dynastream.com
>
>


This e-mail and any attachments may contain confidential material for the sole
use of the intended recipient. If you are not the intended recipient, please
be aware that any disclosure, copying, distribution or use of this e-mail or
any attachment is prohibited. If you have received this e-mail in error,
please contact the sender and delete all copies.

Thank you for your cooperation.
_______________________________________________

tigers@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums


<Prev in Thread] Current Thread [Next in Thread>