tigers
[Top] [All Lists]

Re: [Tigers] Auto Meter tach

To: "'Smit, Theo'" <Theo.Smit@dynastream.com>, <Rollright@aol.com>,
Subject: Re: [Tigers] Auto Meter tach
From: "jim" <jim@island.net>
Date: Mon, 30 May 2011 18:36:07 -0700
Hi Jim

I thought I'd chime in here as the 'green' wire might be confusing... I say
that because the existing 'green' wire that went to the original tach is 12v
! As you know there is no
color code on the back of the Autometer tach... only neg., 12v. and ign.
Terminals... What I did was tie in the Autometer neg. terminal and also the
black pigtail from the light to
the gauge grounds... and used the existing green wire from the harness to
the 12v. terminal. You need to then run a 'NEW' wire ( I used an orange one
) from the ign. Terminal to 
either the coil ( - ) terminal or an MSD tach terminal as Theo says...

Hope that helps...

Jim Gislason
B382000446

PS  If you know of anyone wanting another one of those tachs.. I have one
with a 6k redline assembled.. and all the parts and face for a 7k redline
one...



 

-----Original Message-----
From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
On Behalf Of Smit, Theo
Sent: Monday, May 30, 2011 2:36 PM
To: Rollright@aol.com; tigers@Autox.Team.Net
Subject: Re: [Tigers] Auto Meter tach

If it's proper Autometer internal guts then you connect the green tach wire
to
the coil negative terminal (the one that connects to the breaker points,
Pertronix black, etc.)
If you're using an MSD then connect the green wire to the MSD's tach output
terminal.

Cheers,
Theo

> -----Original Message-----
> From: tigers-bounces@autox.team.net [mailto:tigers-
> bounces@autox.team.net] On Behalf Of Rollright@aol.com
> Sent: May 30, 2011 12:28 PM
> To: tigers@Autox.Team.Net
> Subject: [Tigers] Auto Meter tach
>
> Hello,
>
> Well, the tach project is finished. Now I'd  like to test it on the
> car
> before installation.
>
> The easy part is 12 Volts and Gnd.
>
> What can I hook the third "signal" terminal to?
>
> And finally, when I pull out the old tach, how do I hook up the new
> one.
> Yes, I know 12V and Gnd. I'm concerned and confused about the third
> terminal.
>
> Can anyone help?
>
> Jim  Armstrong
> _______________________________________________
>
> tigers@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/theo.smit@dynastream.com
>
>


This e-mail and any attachments may contain confidential material for the
sole
use of the intended recipient. If you are not the intended recipient, please
be aware that any disclosure, copying, distribution or use of this e-mail or
any attachment is prohibited. If you have received this e-mail in error,
please contact the sender and delete all copies.

Thank you for your cooperation.
_______________________________________________

tigers@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/tigers/jim@island.net
_______________________________________________

tigers@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums


<Prev in Thread] Current Thread [Next in Thread>