Just remove the shifter boot and you will have a constant flow of
heat. :)
Generally the problem with the blower motor is that the bushings seize to
the motor shaft. You can get inside the motor but you need to be a bit
careful pulling it apart. Remove the bushings from the shaft, clean them,
soak them in oil, clean the motor shaft, assemble the blower motor.
Ron Fraser
-----Original Message-----
From: Tigers [mailto:tigers-bounces@autox.team.net] On Behalf Of Owain Lloyd
Sent: Sunday, November 30, 2014 11:42 PM
To: Tom Witt
Cc: tigers@autox.team.net
Subject: Re: [Tigers] Tiger blower motor
where do you live? can't you just change down a gear? :) I don't remember
ever once turning on my (perfectly functional, i think) blower motor! I've
never being cold in the tiger despite plenty of trips below freezing.
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net
|