tigers
[Top] [All Lists]

[Tigers] oil pressure hose fitting

To: "tigers@autox.team.net" <tigers@autox.team.net>
Subject: [Tigers] oil pressure hose fitting
From: "Bates,Robert E Jr via Tigers" <tigers@autox.team.net>
Date: Sat, 6 Oct 2018 18:36:22 +0000
Accept-language: en-US
Delivered-to: mharc@autox.team.net
Delivered-to: tigers@autox.team.net
References: <mailman.3.1538848801.32767.tigers@autox.team.net>
Thread-index: AQHUXaN6RFMAYs2iMkq4g4ByMwlgAA==
Thread-topic: oil pressure hose fitting
What worked for me was to take the hose, with both fittings, to the local 
hydraulic hose repair store.  They used the old fittings with new hose.  They 
need all of the old hose so the length is correct as well as the relationship 
of the 2 hose ends.

Bob


________________________________________
From: Tigers <tigers-bounces@autox.team.net> on behalf of 
tigers-request@autox.team.net <tigers-request@autox.team.net>
Sent: Saturday, October 6, 2018 2:00 PM
To: tigers@autox.team.net
Subject: Tigers Digest, Vol 10, Issue 242

Send Tigers mailing list submissions to
        tigers@autox.team.net

To subscribe or unsubscribe via the World Wide Web, visit
        
https://urldefense.proofpoint.com/v2/url?u=http-3A__autox.team.net_mailman_listinfo_tigers&d=DwICAg&c=pZJPUDQ3SB9JplYbifm4nt2lEVG5pWx2KikqINpWlZM&r=HembK0xWqI4wXkiIop6cydVFmYD9MOOa9hEG3QLKkJ8&m=fIM0ZUX1F6XDf2GA80TK4374oVtvCYqOMBktomHqQVg&s=vcPSJ3yvz67i7FYF9UWEnm_5OShZklt2qe0JfaQP1Kk&e=
or, via email, send a message with subject or body 'help' to
        tigers-request@autox.team.net

You can reach the person managing the list at
        tigers-owner@autox.team.net

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Tigers digest..."


Today's Topics:

   1. Re: Oil Pressure Hose/Fitting (Stu)


----------------------------------------------------------------------

Message: 1
Date: Fri, 5 Oct 2018 19:03:31 -0400
From: Stu <sabre2tgr@gmail.com>
To: Richard Bruner <gammaman@mokancomm.net>
Cc: Tiger Net <tigers@autox.team.net>
Subject: Re: [Tigers] Oil Pressure Hose/Fitting
Message-ID:
        <CA+DpG66yLfnO4LoLY2ULAEbqwZF_UrCVpBNyttnEmKsNtsQxog@mail.gmail.com>

Was this still the ORIGINAL hose??? If so, remove it and toss it in the
trash.  They are extremely brittle by now.   Many of us can confirm this,
by personal experience.

Get one of the replacement kits,  SS or CAT should have something
available.  Is the steel braided line still available?

Stu

On Fri, Oct 5, 2018 at 4:18 PM Richard Bruner via Tigers <
tigers@autox.team.net> wrote:

> The oil pressure hose on my car cracked near the block, with a predictable
> result.  I cut the cracked section off, and am trying to get the old,
> brittle hose back on the barbed fitting.  I've tried a lighter, a hair
> dryer and a heat gun so far, with no luck.  The hose blisters before
> getting hot enough to go on the fitting.
>
> Any suggestions?
>
> Richard Bruner_______________________________________________
>
> tigers@autox.team.net
>
> Donate: 
> https://urldefense.proofpoint.com/v2/url?u=http-3A__www.team.net_donate.html&d=DwICAg&c=pZJPUDQ3SB9JplYbifm4nt2lEVG5pWx2KikqINpWlZM&r=HembK0xWqI4wXkiIop6cydVFmYD9MOOa9hEG3QLKkJ8&m=fIM0ZUX1F6XDf2GA80TK4374oVtvCYqOMBktomHqQVg&s=fVstpAaK1NQdQ_rpWbS10D-w9lWlkxfhfv7aS9EMctg&e=
> Archive: 
> https://urldefense.proofpoint.com/v2/url?u=http-3A__www.team.net_pipermail_tigers&d=DwICAg&c=pZJPUDQ3SB9JplYbifm4nt2lEVG5pWx2KikqINpWlZM&r=HembK0xWqI4wXkiIop6cydVFmYD9MOOa9hEG3QLKkJ8&m=fIM0ZUX1F6XDf2GA80TK4374oVtvCYqOMBktomHqQVg&s=uu75_Hw6IPsJOi1cqzZKCmWCSLWh14Y7YtSUJuHSo1g&e=
>
> Unsubscribe:
> https://urldefense.proofpoint.com/v2/url?u=http-3A__autox.team.net_mailman_options_tigers_sabre2tgr-40gmail.com&d=DwICAg&c=pZJPUDQ3SB9JplYbifm4nt2lEVG5pWx2KikqINpWlZM&r=HembK0xWqI4wXkiIop6cydVFmYD9MOOa9hEG3QLKkJ8&m=fIM0ZUX1F6XDf2GA80TK4374oVtvCYqOMBktomHqQVg&s=snuV2G-aRi09UpXlUQwuQJ3eTcdjHvMZX1wjDeUAxDE&e=
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<https://urldefense.proofpoint.com/v2/url?u=http-3A__autox.team.net_pipermail_tigers_attachments_20181005_38de27f0_attachment-2D0001.html&d=DwICAg&c=pZJPUDQ3SB9JplYbifm4nt2lEVG5pWx2KikqINpWlZM&r=HembK0xWqI4wXkiIop6cydVFmYD9MOOa9hEG3QLKkJ8&m=fIM0ZUX1F6XDf2GA80TK4374oVtvCYqOMBktomHqQVg&s=gO7vgHNyTwIh_QmyGp0VALhrTLPUTWzuR04kemiYpZ4&e=>

------------------------------

Subject: Digest Footer

_______________________________________________
Tigers mailing list
Tigers@autox.team.net
https://urldefense.proofpoint.com/v2/url?u=http-3A__autox.team.net_mailman_listinfo_tigers&d=DwICAg&c=pZJPUDQ3SB9JplYbifm4nt2lEVG5pWx2KikqINpWlZM&r=HembK0xWqI4wXkiIop6cydVFmYD9MOOa9hEG3QLKkJ8&m=fIM0ZUX1F6XDf2GA80TK4374oVtvCYqOMBktomHqQVg&s=vcPSJ3yvz67i7FYF9UWEnm_5OShZklt2qe0JfaQP1Kk&e=


------------------------------

End of Tigers Digest, Vol 10, Issue 242
***************************************
_______________________________________________

tigers@autox.team.net

Archive: http://www.team.net/pipermail/tigers

Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net



<Prev in Thread] Current Thread [Next in Thread>
  • [Tigers] oil pressure hose fitting, Bates,Robert E Jr via Tigers <=