Sorry, John, there's no fix. New cables are in order.
"And to think, it all started with a tractor!"
Don Sforza dsforza@megahits.com KA1WV
1963 TR4 Connecticut Triumph Register CT16707L
----------
> From: John L. Walker <up497@freenet.victoria.bc.ca>
> To: triumphs@autox.team.net
> Subject: TR4 Heater cables
> Date: July 8, 1997 3:40 PM
>
>
> The control cables for the heater in my TR4 are broken (Bowden cables)
>
> Both the air vent and the hot water have come apart at the fascia end, so
> they will only "pull" the cable, pushing it back in makes the end of the
> control come out.
>
> Crude diagram:
>
> |Knob>---||========>--->------cable-------~ to car ->
> ^ ^
> fascia end of controller moves here when knob is pressed
>
> Am I missing an Important Part here? Is this a common problem?
>
>
> -Malcolm
>
> Too many rocks and not enough sand.
>
|