Hi All,
I need some help here. Over the winter I rebuilt my brake system. Included in
this was a re-sleeving of the Master Cylinder and new seals. The problem is
that the M/C has developed a leak between the cylinder and the plastic
reservoir. I took the unit apart and made sure that the "O" rings between the
reservoir and the cylinder were in good shape and then replaced the screws that
hold the reservoir on the cylinder. I replaced the unit in the car and bled
the brakes down. It didn't leak until I drove the car to work today.
I'm getting a little desperate as I have already missed one autoX because of
this and really want to race on the 27th.
Any help would be greatly appreciated
Bill M.
'70 Mk3 Spitfire
Huntsville, AL
|