Okay guys...
I couldn't find a replacement one... all efforts to get a used one
(that works) failed...
but when I discovered that I had a THIRD one, in storage... albeit, also
broken...
I decided to dive in and try to make ONE good one out of three dead
ones...
So far... looks pretty good... One was good for the house, one was good
for the Armature... one good for the shaft and gear assembly... etc.
etc.
I'm fabricating some parts that were no good in all three...
I'll let you know how it comes out.
Justin
jmwagner@greenheart.com
http://www.greenheart.com/jmwagner
Los Angeles
|