RE: Frozen slave cylinder, TR4

[Richard Ceraldi-ERC004 <Richard_Ceraldi-ERC004@email.mot.com>]

>I'm seriously considering replacement.  However, before tossing in the 
>towel  I would like to attempt a rebuild.  

It sound like those cylinders threw down the gauntlet to you. If and when 
you get them apart be sure to inspect the bores for pitting. If they are not 
smooth I would toss them as the rubber won't last long and you'll be up on 
the jackstands again (or in the ditch).
Good luck,
Richard