JONATHAN LOPEZ writes:
>I have noticed that my car tends to slip in and out of overdrive when I
>have it engaged. Might there be a simple solution to this?
>Thanks in advance
>Jonathan
Jonathan:
Check out the following items:
1) transmission fluid level
2) wiring to the O/D solenoid and the O/D switches (an the relay)
3) gear selector switch adjustment
In regards to the the third, I converted a transmission to O/D
years ago and I installed two switches in the transmission cover.
I shimmed the switches with a few washers to set the amount of
switch activation and the unit worked fine for a few years. However,
after a while the O/D started dropping in and out, like yours. It
turned out that the switch was just barely made and removing one
washer fixed the problem. It has worked fine ever since.
Dave
71 TR6
74 TR6
78 TR7
|