triumphs
[Top] [All Lists]

REPOST: TR6 Pinion Seal

To: triumph@terraworld.net
Subject: REPOST: TR6 Pinion Seal
From: Jett.Hogger@prodigy.com (MR JOHN M ROSSI)
Date: Tue, 7 Jul 1998 09:48:35, -0500
Cc: triumphs@Autox.Team.Net
Hello Chad:     Replacing the seal is more labor intense than skill.  
Yes the exhaust pipes must be removed.  A dirty, knuckle bleeding job.
  If you have a air impact wrench.  The pinion nut will come right 
off.  If not.  More labor.  Pull the flang off and pry the seal out.  
You will spend three quarters of your time on the exhaust.  If you 
muffler is in good shape.  Replacing the pipes are cheap.
I just did a U-Joints replacment on a 70 tr6.  Had to remove the 
exhaust to get the drive shaft out.  Lost about 4 OZ of blood.  
Replaced it with  36 oz's of  cold beer (ice house) after the job was 
done.  John   Flintstone, ga.    Good luck.

____
John  Rossi

<Prev in Thread] Current Thread [Next in Thread>