triumphs
[Top] [All Lists]

Re: Oil-type grease gun

To: Tomislav Marincic <TomAndKate@compuserve.com>
Subject: Re: Oil-type grease gun
From: scott suhring <suhring@lancnews.infi.net>
Date: Thu, 23 Jul 1998 21:54:09 -0700
Cc: triumphs@Autox.Team.Net
Organization: InfiNet
References: <199807231544_MC2-5408-2390@compuserve.com>
Tom:

I have mine sitting here right next to me. First, let
me say that this absolutely works. I tried a number
of set ups which all failed because I couldn't achieve
enough preasure.  This not only forced the oil into the
trunnions, it had enough presure to force all remaining
grease out!

The oil I have is OMC Ultra-HPF Gearcase Lube P/N 500711

The gun has no part number but when I bought it (at a local
boat/marine shop) the guy said they come with the purchase of
an outboard motor and is used to oil the gearcase. There are
two types: one looks more like a gun with a trigger and the 
other, which I got is what the shop said is standard. All it
is is a die cast metal tube that has a plastic nozel at one end 
(which is threaded), a pump which you manually push in at the
other end and in the middle is the female connector that the oil 
tube screws into. Obviously the plastic nozzel won't do so I
went to the local hardware store and picked up a double threaded
piece of metal tubing (threaded at both ends, about 4") and a
grease gun nipple.  They all screwed toghether perfectly.

Hope this helps.

Scott Suhring
Elizabethtown, PA
'70 TR6

Tomislav Marincic wrote:
> 
>         Triumphisti,
> 
>         About a year ago, we were talking about the difficulty and mess
> involved with oiling the front trunnions using an ordinary grease gun when
> someone mentioned that Mercury Marine made a "grease gun" specifically for
> oiling stern drives. I copied the part number as Mercury/Quicksilver 91-372
> 99A 1 and the gear lube cartridges as 92-19007A24. When I recently tried to
> purchase these, the Mercury Marine dealer told me those were invalid part
> numbers and that he had no idea what product I was describing. The Mercury
> Marine web site was no help either, except for locating dealers.
> 
>         Does anyone have this thing? Where did you get it? Does anyone know
> the correct part number and where I might mail order one?
> 
>         Best Regards,
> 
>         Tom Marincic
>         CD3574L
> 
>         P.S. I know many listers use grease in the trunnions with
> satisfactory results.
> 
>

<Prev in Thread] Current Thread [Next in Thread>