Kurt,
You'd better just post the instructions. Please send me set if you don't
Andy D.
On 10/03/98 07:28 PM Kiitsg@aol.com said...
>
>The best design for a hoist, without pulling down the house or garage, is to
>use 4 pieces of 4X4, for legs, a 4X4 for a cross member, and 2X4's for
>stantions, and 2X4's for gussets. I built a swing set for this kids this way,
>and it will hold an engine with no problem at all. Carriage bolts and lag
>screws hold it together. You are looking at an investment of under $40,
and
>it is indestructible. If you need info on how to build it, email me and I
>will explain in detail. You can break this design down, and store it under a
>deck, or in a garage loft.
>
>Good Luck
>Kurt
>69 TR6
|