Churchill Tool for TR4A - TR^ Rear Hub Separation

[RDB52670@aol.com]

Does any one have the churchill tool needed to separate rear hubs on the TR4A
- TR6 IRS cars.  Took a rear hub to a machine shop to have new bearings put in
and the guy warped the hub, threaded end of the axle and u-joint.  I would
settle for a copy of the blueprints of the tool and have a machinist I know
make the tool for me.

Thanks,
Rob Brooks
1955 TR2 (possible restoration)
1960 TR3A (restored)
1965 TR4A (under restoration)