| To: | Wayne Whippo <WayneWhippo@compuserve.com> |
|---|---|
| Subject: | RE: Pinion Flange and Misprints, crow tastes so good! |
| From: | Barry Schwartz <bschwart@pacbell.net> |
| Date: | Thu, 06 May 1999 11:08:28 -0700 |
| Cc: | triumphs@autox.team.net |
> to 20 lbf in (2.1 to 2.8 kgf m)." >Q. is it "10 to 20 lbf in" or "10 to 20 lbf ft"? ************************************************** Well my conversion comes out to 2.8 kgf /m (kilogram force / meter)= just a tad over 20 ft lb (20.2524) foot pounds (not inch pounds). Does that help clear anything up or just make things worse? Barry Schwartz (San Diego) bschwart@pacbell.net |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | RE: Tubing for brake, clutch and fuel lines on '76 TR6, Randall Young |
|---|---|
| Next by Date: | RE: Pinion Nut Torques, Randall Young |
| Previous by Thread: | RE: Pinion Flange and Misprints, crow tastes so good!, econrad |
| Next by Thread: | Re: Pinion Flange and Misprints, crow tastes so good!, MOWOGMAN |
| Indexes: | [Date] [Thread] [Top] [All Lists] |